Can I turn a bunch of scrap particle board / chipboard into something that is somewhat good-looking? Or is it just a waste of time? Thank you very much for watching!
Big thanks to all my patrons! If you like my videos support me on Patreon: https://www.patreon.com/ollaris
Making all the missing pieces to install the pop up roof on my truck camper from the remains of the rotten Tischer pickup camper. Thank you very much for watching!
Big thanks to all my patrons! If you like my videos support me on Patreon: https://www.patreon.com/ollaris
Visit my Website: http://www.ollaris.tv
Subscribe for more videos: https://www.youtube.com/c/Ollaris
Instagram: https://www.instagram.com/ollari.s
Music by Epidemic Sound (http://www.epidemicsound.com)
This time I’m making a carvers mallet from spalted beech wood on the lathe. The simple shape is ideal when working with different carving chisels while it is also a great exercise in woodturning. The total length is about 10″ (250mm) and the head is 3″ (75mm) wide on the largest part. I used Boiled linseed oil for a finish as i do on all my wooden tools.
Thank you very much for watching!
Big thanks to all my patrons especially The Nerd Inventor, Sithis Michaelis, and Larry Radcliffe!
If you like my videos support me on Patreon: https://www.patreon.com/ollaris
Shop Tools/Supplies (affiliate):
Bandsaw: http://amzn.to/2FwECMy
Visit my Website: http://www.ollaris.tv
Subscribe for more videos: https://www.youtube.com/c/Ollaris
Twitter: https://www.twitter.com/Ollari_s
Instagram: https://www.instagram.com/ollari.s
Music by Epidemic Sound (http://www.epidemicsound.com)
Making a simple and cheap router sled for flattening boards and slabs. This jig allows you to joint and plane bigger boards that won’t fit in your planer or jointer with help of a router. I used some 30mm by 30mm angle iron and some 18mm plywood scraps, a few screws and you are done. you can make this in just a couple of minutes. I used some spacers on my router attached with some hot glue to accommodate for the rounded corners of the angle iron. and took some 5cm by 5cm pine wood to ride the sled on. With the plywood strips, I can easily adjust the height of the sled. I’ve chosen an 18mm router bit to flatten the beech slab because that was my largest bit. If you have any questions leave them in the comments down below, I do my best to answer all of them! Thank you very much for watching!
Big thanks to all my patrons especially Sithis Michaelis and Larry Radcliffe!
If you like my videos support me on Patreon: https://www.patreon.com/ollaris
Buy Tshirts and mugs here: https://teespring.com/stores/ollaris
Shop Tools/Supplies (affiliate):
Incra T-rule: https://amzn.to/2xglcM5
Glu-Bot Glue Bottle: https://amzn.to/2LAxcej
Belt Sander: http://amzn.to/2GJ1Srn
Spindle Sander: http://amzn.to/2DImDpz
The track saw: http://amzn.to/2EZLL77
Table saw: http://amzn.to/2DvGHdH
Miter saw: http://amzn.to/2DuJi7F
Nail Gun: http://amzn.to/2Ds47kV
Compressor: http://amzn.to/2FYOhMg
Bandsaw: http://amzn.to/2FwECMy
Visit my Website: http://www.ollaris.tv
Subscribe for more videos: https://www.youtube.com/c/Ollaris
Twitter: https://www.twitter.com/Ollari_s
Instagram: https://www.instagram.com/ollari.s
Music by Epidemic Sound (http://www.epidemicsound.com)
Whooo! This just happened! Back in early 2016 when I started my journey on YouTube I never thought I could reach this. For some people, this is just a number, but for me, it’s more than just that. It’s Hundred thousand people who encourage me to make more and better videos. Hundred thousand individuals who want to see what I make. Hundred thousand friends who wait for a new project.
This just blows my mind!
You all helped me to make this happen. Without you, I won’t be able to do what I love for a living. Without you, I couldn’t support my family and myself. Without your help I this all would be nothing.
Thank you from the bottom of my heart!
I set up a store: https://www.teespring.com/stores/ollarisĀ where you can get T-shirts and Mugs for a limited time if you would like to support my work and the channel!