Probably the Easiest Router Sled out there ( Flattening a Live Edge Slab without a Planer)

Making a simple and cheap router sled for flattening boards and slabs. This jig allows you to joint and plane bigger boards that won’t fit in your planer or jointer with help of a router. I used some 30mm by 30mm angle iron and some 18mm plywood scraps, a few screws and you are done. you can make this in just a couple of minutes. I used some spacers on my router attached with some hot glue to accommodate for the rounded corners of the angle iron. and took some 5cm by 5cm pine wood to ride the sled on. With the plywood strips, I can easily adjust the height of the sled. I’ve chosen an 18mm router bit to flatten the beech slab because that was my largest bit. If you have any questions leave them in the comments down below, I do my best to answer all of them! Thank you very much for watching!

Big thanks to all my patrons especially Sithis Michaelis and Larry Radcliffe!

If you like my videos support me on Patreon:

Buy Tshirts and mugs here:

Shop Tools/Supplies (affiliate):

Incra T-rule:
Glu-Bot Glue Bottle:
Belt Sander:
Spindle Sander:
The track saw:
Table saw:
Miter saw:
Nail Gun:

Visit my Website:

Subscribe for more videos:



Music by Epidemic Sound (

100.000 Subscribers !!!!!! Thank You! Merch Available

Whooo! This just happened! Back in early 2016 when I started my journey on YouTube I never thought I could reach this. For some people, this is just a number, but for me, it’s more than just that. It’s Hundred thousand people who encourage me to make more and better videos. Hundred thousand individuals who want to see what I make. Hundred thousand friends who wait for a new project.

This just blows my mind!

You all helped me to make this happen. Without you, I won’t be able to do what I love for a living. Without you, I couldn’t support my family and myself. Without your help I this all would be nothing.

Thank you from the bottom of my heart!

I set up a store:Ā  where you can get T-shirts and Mugs for a limited time if you would like to support my work and the channel!

Thank you VERY much! You guys rock!