Making a Floor standing LED Lamp from Scrap Steel

I made this floor standing lamp from a steel scrap that I had laying around my shop, this was also the perfect opportunity to try out my new Plasma Cutter which I bought just recently (I put a link to it down below)

I f you would like to make this lamp yourself i’m pretty certain you could do all the cutting with a Jigsaw(with a metal cutting blade) or an angle grinder( just make straight cuts in the square tube instead of the curvy lines.

Thank you very much for watching!

Big thanks to all my patrons especially Nerd Inventor, Sithis Michaelis, and Larry Radcliffe!

If you like my videos support me on Patreon: https://www.patreon.com/ollaris

Favorite tools in this video (affiliate)

Plasma cutter:
German link: https://amzn.to/2Y8izZW

USA link: https://amzn.to/2K1eRsp

Metal cutting Bandsaw:
German link: https://amzn.to/2ykS2Ju

Visit my Website: http://www.ollaris.tv

Subscribe for more videos: https://www.youtube.com/c/Ollaris

Twitter: https://www.twitter.com/Ollari_s

Instagram: https://www.instagram.com/ollari.s

Music by Epidemic Sound (http://www.epidemicsound.com)

I’m Sorry! I messed up a Diresta Ice Pick… DirestaOfUs #10

There are so many uses for an Ice pick other than picking some Ice! In this video, I’ll try to expand on the usability by adding a permanent marker and some simple measuring marks to it.

This video is a part of the #DIRESTAOFUS video collaboration Started By Brian Lane at Wooden Creationz.

NO ICE PICKS WERE HARMED IN THE MAKING OF THIS VIDEO!

Thank you very much for watching!

Check out the playlist of the other videos: https://www.youtube.com/watch?v=RQnatRiZ43k&list=PLY-kQMn1hIswZCT1Zl5Nr39RUrhMBn7fV

Wooden Creationz: https://www.youtube.com/user/WoodenCreationz

Big thanks to all my patrons especially Nerd Inventor, Sithis Michaelis, and Larry Radcliffe!

If you like my videos support me on Patreon: https://www.patreon.com/ollaris

Visit my Website: http://www.ollaris.tv

Subscribe for more videos: https://www.youtube.com/c/Ollaris

Twitter: https://www.twitter.com/Ollari_s

Instagram: https://www.instagram.com/ollari.s

Music by Epidemic Sound (http://www.epidemicsound.com)

ollaris #Diresta

Making a Bench that turns into a Double Bed

This Bench easily folds out to become a Double size bed, Ideal for small living spaces. And you can store all the parts and the air mattress under the seat of the bench. I used 3 Sheets of 18mm pine plywood, hinges, screws, wood glue and clear waterbased varnish for finish. It can be made by using just 3 basic woodworking tools such as a Circular saw a Drill and a Sander.

This Video is a Part of the 10 Makers Series put up by Laura Kampf and HiKOKI Power Tools.

Thank you very much for watching!

Watch the First video here: https://youtu.be/d4uLEv8mfNI

Follow all the Makers here:

SEBASTIAN http://www.youtube.com/ollaris
HABU http://www.youtube.com/hassanabuizmero
ELLEN http://www.youtube.com/craftswithellen
AL http://www.youtube.com/alshackshack
STEVE https://www.youtube.com/moonshinemeta…
JESSIE http://www.youtube.com/ijessup
BRETT http://www.youtube.com/brettmcafee
LUKAS http://www.youtube.com/jenniswiss

Also check out Hikoki for some sweet giveaways: https://www.instagram.com/hikokiuk/

Big thanks to all my patrons especially Sithis Michaelis and Larry Radcliffe!

If you like my videos support me on Patreon: https://www.patreon.com/ollaris

Visit my Website: http://www.ollaris.tv

Subscribe for more videos: https://www.youtube.com/c/Ollaris

Twitter: https://www.twitter.com/Ollari_s

Instagram: https://www.instagram.com/ollari.s

Music by Epidemic Sound (http://www.epidemicsound.com)

Building a Fire Pit / Grill from Scrap materials

I made this Simple wood burning Fire pit from scrap that I had laying around. Including an old washing machine drum, some steel pipes, and an old cast iron Grill plate.

Thank you very much for watching!

Big thanks to all my patrons especially Sithis Michaelis and Larry Radcliffe!

If you like my videos support me on Patreon: https://www.patreon.com/ollaris

Visit my Website: http://www.ollaris.tv

Subscribe for more videos: https://www.youtube.com/c/Ollaris

Twitter: https://www.twitter.com/Ollari_s

Instagram: https://www.instagram.com/ollari.s

Music by Epidemic Sound (http://www.epidemicsound.com)

Forging Basic Blacksmiths Tongs | Beginner Blacksmithing Project

This is my First blacksmithing project so if I can do it you can make them too! In total, I used about 300mm of 25mm x 6 mm mild steel flat bar for the forged tongs and about 800mm of the same material for the “stupid” simple ones. Which can be reused for forging new tongs.

For a step by step tutorial please check out John’s video: https://youtu.be/dHrgefJ7NvI

Thank you very much for watching!

Big thanks to all my patrons especially Sithis Michaelis and Larry Radcliffe!

If you like my videos support me on Patreon: https://www.patreon.com/ollaris

Visit my Website: http://www.ollaris.tv

Subscribe for more videos: https://www.youtube.com/c/Ollaris

Twitter: https://www.twitter.com/Ollari_s

Instagram: https://www.instagram.com/ollari.s

Music by Epidemic Sound (http://www.epidemicsound.com)

Dual Burner Propane Gas Forge build

Building a Gas forge with Dual Burners. The forge is easy to disassemble and transport it can be used with or without the stand. The forge stand has an extendable rest to hold longer material and also a tool rack for hanging tongs.

I’ve ordered the burners from www.forgeburners.com

Thank you very much for watching!

Big thanks to all my patrons especially Sithis Michaelis and Larry Radcliffe!

If you like my videos support me on Patreon: https://www.patreon.com/ollaris

Visit my Website: http://www.ollaris.tv

Subscribe for more videos: https://www.youtube.com/c/Ollaris

Twitter: https://www.twitter.com/Ollari_s

Instagram: https://www.instagram.com/ollari.s

Music by Epidemic Sound (http://www.epidemicsound.com)

Industrial Side Table made from Beams | with a Special feature

I made this Nightstand / Side table / Bedside table (or call it what you like) using reclaimed pine beams and flat steel bar for the industrial look.
It has a built-in “Magazine bookmark” which you can also use to hold other things…. 😉 Watch until the end for the special feature…

Thank you very much for watching!

Big thanks to all my patrons especially Sithis Michaelis and Larry Radcliffe!

If you like my videos support me on Patreon: https://www.patreon.com/ollaris

Shop Tools/Supplies (affiliate links):

Incra T-rule: https://amzn.to/2xglcM5
Glu-Bot Glue Bottle: https://amzn.to/2LAxcej
The track saw: http://amzn.to/2EZLL77
Table saw: http://amzn.to/2DvGHdH
Chop saw: http://amzn.to/2DuJi7F
Bandsaw: http://amzn.to/2FwECMy

Visit my Website: http://www.ollaris.tv

Subscribe for more videos: https://www.youtube.com/c/Ollaris

Twitter: https://www.twitter.com/Ollari_s

Instagram: https://www.instagram.com/ollari.s

Music by Epidemic Sound (http://www.epidemicsound.com)

Wastebasket from Plywood with woven pattern / Or is it a Lampshade?

Making a trash can from plywood. Or is it a lampshade? Back in 2016, I made a Twisted plywood lamp from cut up strips of 18mm plywood, at that time I experimented with weaving these thin plywood strips together without any luck. So this time i Make a rubbish bin with the same materials but instead of weaving the strips together I’ll just glue them together in a woven pattern. The glue I’m using is just regular Cyanoacrylate (super glue) glue with an activator which helps the glue to dry quicker.
For finishing, I just use a satin clear spray lacquer. This wastebasket is meant to be used in my office for paper waste. Or should I use it as a lampshade instead?

Thank you very much for watching!

Big thanks to all my patrons especially Sithis Michaelis and Larry Radcliffe!

If you like my videos support me on Patreon: https://www.patreon.com/ollaris

Shop Tools/Supplies (affiliate):

Belt Sander: http://amzn.to/2GJ1Srn
Spindle Sander: http://amzn.to/2DImDpz
Table saw: http://amzn.to/2DvGHdH

Visit my Website: http://www.ollaris.tv

Subscribe for more videos: https://www.youtube.com/c/Ollaris

Twitter: https://www.twitter.com/Ollari_s

Instagram: https://www.instagram.com/ollari.s

Music by Epidemic Sound (http://www.epidemicsound.com)

Simple Box Joint Jig for the Router Table

This is a simple way to build a jig that makes it possible to cut box joints also known as finger joints on your router table ( Build video for mine: https://youtu.be/-xHVPCrR7OU ) I used some leftover MDF but you can also use Plywood for this. I recommend that you use an up cut spiral bit like this one: https://amzn.to/2TuKC38 to in your preferred size to prevent tear out. I use a sacrificial piece to prevent tear out on my workpiece.

Thank you very much for watching!

Big thanks to all my patrons especially Sithis Michaelis and Larry Radcliffe!

If you like my videos support me on Patreon: https://www.patreon.com/ollaris

Visit my Website: http://www.ollaris.tv

Subscribe for more videos: https://www.youtube.com/c/Ollaris

Twitter: https://www.twitter.com/Ollari_s

Instagram: https://www.instagram.com/ollari.s

Music by Epidemic Sound (http://www.epidemicsound.com)