Heavy Duty C Clamps made from Scrap materials

This week I’m going to make some heavy-duty Clamps from Steel and some hardware. These are very useful for welding and fabrication work. The 17mm hex on the end allows the use of a drill for fast adjustment.

Thank you very much for watching!

Big thanks to all my patrons especially Sithis Michaelis and Larry Radcliffe!

If you like my videos support me on Patreon: https://www.patreon.com/ollaris

Subscribe for more videos: https://www.youtube.com/c/Ollaris

Instagram: https://www.instagram.com/ollari.s

Music by Epidemic Sound (http://www.epidemicsound.com)

Steel and Plywood Coat Rack | Functional Wall Art

Is it just wall art or a useful coat rack? Why not both?

Using some Rebar cutoffs and a little bit of scrap 18mm plywood to build this modern coat rack which also doubles as an art piece when it is not in use.

The rebar hooks swing out so that you can hang your coats on it.

I hope you enjoy the video! Thank you very much for watching!

Big thanks to all my patrons especially Sithis Michaelis and Larry Radcliffe!

If you like my videos support me on Patreon: https://www.patreon.com/ollaris

Shop Tools/Supplies (affiliate):

Incra T-rule: https://amzn.to/2xglcM5

Table saw: http://amzn.to/2DvGHdH

Subscribe for more videos: https://www.youtube.com/c/Ollaris

Instagram: https://www.instagram.com/ollari.s

Music by Epidemic Sound (http://www.epidemicsound.com)

Wall Mounted Portable Bandsaw Stand // Perfect for Small Spaces!

This wall mount enables you to use the bandsaw in an upright position so it does not take up any space on your table. But with the help of the stand, you can use it clamped down to a horizontal surface also. It’s also easily mounted back on its factory stand with just a couple of screws.

Thank you very much for watching!

Big thanks to all my patrons especially Sithis Michaelis and Larry Radcliffe!

If you like my videos support me on Patreon: https://www.patreon.com/ollaris

Visit my Website: http://www.ollaris.tv

Subscribe for more videos: https://www.youtube.com/c/Ollaris

Twitter: https://www.twitter.com/Ollari_s

Instagram: https://www.instagram.com/ollari.s

Music by Epidemic Sound (http://www.epidemicsound.com)

Old Rusty Soft Faced Hammer Restoration

I found this old soft-faced hammer at my local scrapyard I really like the unique shape and the brass face. Not sure what kind of material the other face was originally but I only had this leftover hard plastic of unknown type.

I don’t think that grinding away the original metal to get a nice, shiny surface is worth ruining the history of the tool and the marks of the craftsman that used it. It’s going to be used as a tool to hit things with.

The handle is made from Beech with a Walnut wedge, coated with boiled linseed oil. Thank you very much for watching!

Big thanks to all my patrons especially Sithis Michaelis and Larry Radcliffe!

If you like my videos support me on Patreon: https://www.patreon.com/ollaris

Subscribe for more videos: https://www.youtube.com/c/Ollaris

Instagram: https://www.instagram.com/ollari.s

Music by Epidemic Sound (http://www.epidemicsound.com)

Build a Solid and Mobile Outfeed and Assembly Table

Building a sturdy and mobile outfeed table that doubles as an assembly table from 2x4s for the base and an MDF wasteboard on top of 18mm birch plywood. It can easily be upgraded to a practical workbench.

The lifting-rolling casters make it ideal for small workspaces or garages.

Thank you very much for watching!

Big thanks to all my patrons especially Sithis Michaelis and Larry Radcliffe!

If you like my videos support me on Patreon: https://www.patreon.com/ollaris Shop

Tools/Supplies (affiliate):

Workbench Caster Kit: https://amzn.to/2R9Q3Rb

Belt Sander: http://amzn.to/2GJ1Srn

Spindle Sander: http://amzn.to/2DImDpz

Tracksaw: http://amzn.to/2EZLL77

Table saw: http://amzn.to/2DvGHdH

Miter saw: http://amzn.to/2DuJi7F

Nail Gun: http://amzn.to/2Ds47kV

Compressor: http://amzn.to/2FYOhMg

Bandsaw: http://amzn.to/2FwECMy

Visit my Website: http://www.ollaris.tv

Subscribe for more videos: https://www.youtube.com/c/Ollaris

Instagram: https://www.instagram.com/ollari.s

Music by Epidemic Sound (http://www.epidemicsound.com)

Making a Modern Bar Stool from Seat Belts and Steel

I had some old car Seat belts laying around and I always wondered how I could repurpose those into something useful. They are more than strong enough to carry the weight of a person or two. The steel frame of this stool is made from 25mm square tubing.

Big thanks to Scheppach for sponsoring this week’s video! Visit their site for more information on the tools I used at https://www.scheppach.com/

 Thank you very much for watching!

Big thanks to all my patrons especially Sithis Michaelis and Larry Radcliffe!

If you like my videos support me on Patreon: https://www.patreon.com/ollaris

Shop Tools/Supplies (affiliate):

Scheppach Metal-cutting Bandsaw: https://amzn.to/39rWaZF

Subscribe for more videos: https://www.youtube.com/c/Ollaris

Instagram: https://www.instagram.com/ollari.s

Music by Epidemic Sound (http://www.epidemicsound.com)

4 Useful Accessories for Every Drill Press

 Probably the most important jig for me is the plywood table with a sacrificial insert. This helps by supporting bigger pieces and the sacrificial part minimizes the blowout. It can be removed quickly when you need to drill into metal.

– The second one is a Digital readout to get precise hole depths. Although the drill press has a depth stop this simple readout helps when you need that extra bit of precision. I just used a cheap digital caliper and a bit of aluminum.

– The third one is a Drillbit storage arm for my most used bits. You just need a bit of plywood, a small piece of aluminum a few screws and the matching size muffler clamp.

– The Fourth is probably the simplest one, It just uses a Flexible drain hose( used for sinks) and a hose clamp. Just pick the right drain hose that fits your shop vac the closest in diameter so you can plug it into it.

I hope you like the video. Thank you very much for watching!

Big thanks to Scheppach for sponsoring this week’s video! Visit their site for more information on the tools I used at https://www.scheppach.com/

Shop Tools/Supplies (affiliate):

Scheppach DP18Vario Drill Press: https://amzn.to/38GebmA

Belt Sander: http://amzn.to/2GJ1Srn

Table saw: http://amzn.to/2DvGHdH

Nail Gun: http://amzn.to/2Ds47kV

Compressor: http://amzn.to/2FYOhMg

Incra T-rule: https://amzn.to/2xglcM5

Glu-Bot Glue Bottle: https://amzn.to/2LAxcej

Big thanks to all my patrons especially Sithis Michaelis and Larry Radcliffe!

If you like my videos support me on Patreon: https://www.patreon.com/ollaris Visit my

Website: http://www.ollaris.tv

Subscribe for more videos: https://www.youtube.com/c/Ollaris

Twitter: https://www.twitter.com/Ollari_s

Instagram: https://www.instagram.com/ollari.s

Music by Epidemic Sound (http://www.epidemicsound.com)

Modern Corner Shelf with Hidden Drawer and Secret Compartment

In this video, I build a Floating Corner Shelf with a Secret compartment and a hidden drawer.
Thank you very much for watching!

Big thanks to all my patrons especially The Nerd Inventor, Sithis Michaelis, and Larry Radcliffe!

If you like my videos support me on Patreon: https://www.patreon.com/ollaris

Shop Tools/Supplies (affiliate):

Tracksaw: http://amzn.to/2EZLL77
Table saw: http://amzn.to/2DvGHdH

Visit my Website: http://www.ollaris.tv

Subscribe for more videos: https://www.youtube.com/c/Ollaris

Instagram: https://www.instagram.com/ollari.s

Music by Epidemic Sound (http://www.epidemicsound.com)

Making a Draw Knife from an Old Rusty Metal File

I’m making a drawknife from an old file that I found on the scrap yard. After Annealing the file I forged it into the desired shape and bent the thangs to receive the handles that I’ve turned from beech firewood. After the steel has cooled down slowly ive burned the handles to get a perfect fit. For the hardening process, I heated the steel to a non-magnetic state and quenched the edge in pre-warmed vegetable oil. After the hardening was done I tempered the edge to a dark straw color. Afterwards the handles were glued on with two-part epoxy and additional copper ferrules. The handles were coated with boiled linseed oil.
Thank you very much for watching!

Big thanks to all my patrons especially The Nerd Inventor, Sithis Michaelis and Larry Radcliffe!

If you like my videos support me on Patreon: https://www.patreon.com/ollaris

Visit my Website: http://www.ollaris.tv

Subscribe for more videos: https://www.youtube.com/c/Ollaris

Twitter: https://www.twitter.com/Ollari_s

Instagram: https://www.instagram.com/ollari.s

Music by Epidemic Sound (http://www.epidemicsound.com)

Turning a Simple Carvers Mallet from Spalted Beech

This time I’m making a carvers mallet from spalted beech wood on the lathe. The simple shape is ideal when working with different carving chisels while it is also a great exercise in woodturning. The total length is about 10″ (250mm) and the head is 3″ (75mm) wide on the largest part. I used Boiled linseed oil for a finish as i do on all my wooden tools.
Thank you very much for watching!

Big thanks to all my patrons especially The Nerd Inventor, Sithis Michaelis, and Larry Radcliffe!

If you like my videos support me on Patreon: https://www.patreon.com/ollaris

Shop Tools/Supplies (affiliate):

Bandsaw: http://amzn.to/2FwECMy

Visit my Website: http://www.ollaris.tv

Subscribe for more videos: https://www.youtube.com/c/Ollaris

Twitter: https://www.twitter.com/Ollari_s

Instagram: https://www.instagram.com/ollari.s

Music by Epidemic Sound (http://www.epidemicsound.com)